Assignment: Creating Models
Content
In this assignment, you will complete at least 2 major designs using Fusion 360 to ensure that you have a working knowledge of the commands and how to use the software.
I have provided approximate timings for you so that you do NOT spend all your time (doing something you like and neglecting other modules!)
| Time |
Task |
| 45 min |
Go through the video Tutorials listed above |
| 30 min |
Design a name tag for your keyring |
| 60 min |
Design a fidget spinner |
Here is a quick guide:
- Design a name tag for your key chain. Follow the specifications and guidelines in the instruction sheet.
- Design a fidget spinner using a roller-skate bearing and M8 nuts. Use the following as a guide, you may change the design if you so wish.
Instruction Sheets
- Name tag
- Fidget Spinner
Specifications
- Document your work as you go, remember to attach
- short notes on how you created the design (there should be at least 3-4 paragraphs with appropriate screen captures/photographs)
- screen shots of your finished product.
- highlight any tips that you would want your classmates to know if they were to complete the same projects.
- the exported Fusion 360 design file (.f3d)
- Update your blog with the work done.
Graded
This assignment is graded and will contribute to a component mark in your assessment. The grading will be based on the content published on the blog-site.
May 2020